Vehicles today are designed with motors that produce powerful amounts of heat. Every time you drive your car, the radiator transfers heat from the engine using thermal heat exchange, which prevents the vehicle from overheating. But in order for a car radiator to function properly, it must have sufficient amounts of liquid coolant running through its core. When it doesn’t have sufficient levels of radiator fluid (coolant), or it is defective in some way, your car engine will over heat. In the case that your car radiator ever fails you, be sure you know exactly what to do.
What To Do When Your Car Starts to Over Heat:
When a car has just overheated, attempting to drive it further can risk harming the engine. You should never drive an overheating car because the engine (and other important inner components) can sustain irrevocable damages. It can also be dangerous to you and anyone in or around the vehicle. For instance, head gaskets can blow, engine parts can melt, and smoke can accumulate in large masses.
So the first thing to do when you notice that your car is over-heating, is pull over to a safe part of the road. It is recommended to try to pull into a neighborhood or parking lot if there is one there at the moment; otherwise, simply find a flat surface on the side of the road.
ALLOW THE ENGINE TO COOL
Once you have pulled over and turned the engine off, be sure to turn on your hazards to alert people of your position. This is especially important at night. Keep all car lights on in the evening if you are ever pulled over on the edge of a street. Many people make the mistake of opening their hoods right away and touching the radiator cap; this is a huge mistake! The car engine and radiator will be very hot and can cause second and third degree burns. Always allow your vehicle to cool off for at least fifteen minutes, depending on the amount of time spent driven prior to the break down. This way you can protect yourself from accidents and injury.
CHECK FOR FLUID LEAKS
When the vehicle has completely cooled, check around and underneath it for any signs of leaking. This could indicate a wide variety of issues, from a cracked radiator to a faulty radiator hose. If there is no sign of leakage, take a look at the oil. Remove the dipstick and concentrate on the color. If it is dark brown and sludgy-looking, this means the liquid coolant might be seeping into the engine. This can result from a blown head gasket or cracked engine block. Even if the oil looks normal, these damages may still be the underlying problem.
CONTACT A MECHANIC
The best thing to do in a situation like this is call a mechanic shop once you have the car pulled over. They are the professionals that can accurately diagnose the issue behind your overheating vehicle. When antifreeze and coolant aren’t the answer, trust a licensed auto repair technician to figure it out for you. Use a directory to contact a towing service that can transport your vehicle directly to the auto repair shop, and give you a ride there too, all in the same trip.
Whether you have owned a car for many years or just bought a new model, it is practical to put in place a proper maintenance schedule. There are many things to consider in the process of maintenance. It is essential to keep on top of the mechanical maintenance to ensure the vehicle is kept running. However, you also want to invest time on the general appearance inside and out. Keeping the vehicle in top condition relies on a variety of methods such as washing, polishing and waxing.
Let’s take a look at the benefits of polishing and waxing your vehicle:
A proper polishing session is a wonderful way to restore the paint. Polishing is practical for correcting a variety of issues, such as problems related to etching, water spots, swirl marks, scratches and stone chips. Applying polish to improve the appearance is only practical if the chips or scratches are surface marks. If the vehicle has deep penetrating marks, the process of applying polish on its own isn’t enough to restore the original look.
Once the polishing is complete, the vehicle will have a nice protective layer that lasts for quite a while. There will be fewer issues with dirt and grime because a clean, smooth surface is more difficult to stick to. This should mean it is a lot easier to keep the vehicle clean in the future.
Also, the polishing process should only take place when it is actually needed. It can include certain degrees of roughness which is needed to remove the minor signs of damage. If a vehicle is polished too often, there is a risk of compromising the all-round quality of the paint.
Out of the two options, waxing is the least harsh cleaning method because it does not feature abrasive compounds that can impact the paint overtime. But, it is still useful to provide a great protective layer on the paint to minimize issues with scratches, chips, or general contaminants in the air. Plus, a regular waxing session is certain to leave the vehicle looking sparkling clean and makes the basic process of washing significantly easier. Even though waxing is a practical choice to minimize the surface marks and scratches, it isn’t a reliable option to restore the paint like a high-quality polish. Also, it is necessary to use the waxing method more often than polishing to help maintain the all-round appearance of the vehicle.
All cars are equipped with a functioning set of lights on the interior and exterior of the car. The lights that are usually found on your dashboard are for your convenience to notify you if there is a problem with the car. The exterior lights are there for the other drivers so that they know what you are about to do.
The indicator lights can be found in the front and the back of the car. These usually shine bright orange so that drivers around you can see that you intend on turning left or right, or are about to change into the next lane. Sometimes, car manufacturers install the indicator lights on the side mirrors for other drivers to have better visibility of your car and the movements you are about to make.
Hazard lights are also orange but flash constantly to notify other drivers that there is a problem with your car. Other drivers will understand that you can’t move faster or at all. So they may safely overtake you.
The headlights are located at the front of the car. These lights are turned on when there is poor visibility of the road. Night time and rainy weather is the main reason for their use. There is barely any reflection on the car at night and it is best to let all night drivers know that you are present on the road.
Fog lights are located on the front of the car too. These are used to see through thick mist or fog and for others to see you. Nowadays, people use them to communicate with other drivers.
Reverse lights are located at the back of the car. It is necessary to have these lights as you have to notify other drivers that you are moving backwards. This will prevent drivers from ramming into you and it lets them know that they, too, have to reverse.
When you put the headlights on, the rear lights will also go on. These are usually a dull red that travels quite far for drivers further away to see. They can’t be very bright in case you blind the drivers.
The day you get your first car is a step into a new chapter of your life. Your first car will also give you a sense of freedom to be yourself including creating an image for yourself on the street. Car modifications can be expensive but, at the same time, it boosts your confidence and gives you real street cred. Here are the different types of car modifications that you could try.
- Cold Air In-take Installation – Installing one of these not only enhances the performance but it also assists the engine with cooling. Long journeys or intensive driving can cause the engine to overheat so what better item to install than an air in-take?
- Short Shifter Installation – This modification is purely for having a good time on the roads. The short shifter minimises the distance before having to change gears. Often, a short shifter also assists the driver with increasing speed which could be useful when overtaking those slow drivers.
- Car Wrapping – Car wrapping is for those car owners who don’t want to get the chassis painted. There are also more patterns, colours and styles that can be used and is much cheaper than getting the car repainted. The downside to having your car wrapped is easy damage to the material. Once the material has been damaged, the car will have to be rewrapped.
- Spoiler Installation – There are tasteful and useful ways of installing a spoiler kit and then there are pointless and ugly spoiler kits that many people install. This wing was designed to assist the car with aerodynamics and the correct shapes make the chassis look good. Other spoiler kits look disproportionate to the rest of the car.
- Chrome Trimming – Adding chrome trimmings to the exterior of your car gives it a little bling without over doing it. The shininess of the chrome also makes the doors and wheel well look good. The end result of adding chrome features enhances the look of the car.
- New Tyres – Make sure that you select the correct size tyres for your car. Some tyres have not been made to fit within the wheel well. Low profiles look good with any car whether it is new or old.
- New Wheels – Wheels are always the best item to get when customising and detailing your car. There are so many different sizes, styles, colours and materials at a wheel supplier that can really make the car pop on the road.
Car modifications are a way that you can express yourself without overspending on a brand new performance car. It is also easier to get simple appearance modifications that make an impression on other drivers.
Designed to re-shape the exterior of your vehicle, usually giving it a more “Sporty” look than the standard version, the addition of a body kit to any vehicle adds a touch of individuality and style from the normal, out of the factory car. A body kit will usually consist of a front and rear spoiler, side skirts and dependent on the model often a roof spoiler for hatch models. Normally supplied finished in primer, the parts of the body kit can be painted to match your vehicles existing body colour. All of the items that go together to comprise the body kit are usually available as individual items. So if you are not looking for a full body makeover, just a simple re-style, then maybe just adding part of the kit may offer an alternative.
All of the items of the body kit are designed for self installation, and are supplied with full fitting instructions. You should only buy genuine manufacturer accessories, that you can be sure will be an exact match to your vehicle. Providing an excellent fit and ultimately completing the transformation of the vehicle.
Not only will the addition of a complete body kit to your vehicle give it that full makeover and extra sporty look it will also provide some better performance at speed. As the items that go to make up the body kit are all derived from the race track, you will feel an improvement in the handling of the vehicle at motorway speeds. The front and rear spoilers are designed to force air under the car. As the air is forced under the car it has to travel faster. By travelling faster it reduces the pressure under the car. The pressure above the car remains constant in relation to the pressure under the car. As the pressure above is greater than that below the car it pushes the car down, or causes down force, sticking the car to the road. The side skirts that also come as part of the kit ensure that the air cannot escape from under the side of the car, so the air is channelled to the back, again increasing the down force.
So not only will adding a full body kit to your vehicle give it an extra sporty look. It will also produce genuine performance enhancements. If you find this hard to believe ask yourself, “If they did not work, why would they put them on racing saloon cars?”
Verde™ Replica Wheels – Make Your Vehicle Stand Out Of the Crowd
Verde™ Replica Wheels trades internationally and the company produces 600,000 wheels annually. The company manufactures one piece cast alloy and these are available in a variety of sizes and bolt patterns, these wheels are available for trucks, cars and other vehicles. Verde™ Replica Wheels is known for their signature style. The company offers a combination of glistening chrome and gleaming black paint. The combination is very difficult to achieve technically. The signature style of the Verde™ Replica Wheels, chrome wheels makes the company stand apart from the other brands.
Chrome rims and wheels
Chrome wheels are one of the ways by which a person can make their vehicles stand out of the crowd. After fitting chrome wheels in your vehicles you re going to see considerable change in your vehicles. The chrome is much shinier and they are also appealing to eyes to keep your chrome wheels, new and appealing you just have to take proper care of your rims. There are plenty of designs and finishes which are available with the company to choose from. They are an also available in different sizes. With chrome wheels you are going to get smoother, lighter and faster drive. These wheels are also cheaper than the alloy wheels. Chrome wheels are also excellent for the daily usage for the resistance and hardness they possess. Chrome wheels are the premium choices for the unique cosmetic appearance.
- Chrome wheels offer nickel polish to handle the hot surfaces
- They are easy to clean
- Offers aesthetic appeal
- Corrosion free
- Hard against the tough surface
- Enhance fuel efficiency
- Temperature durability
- Retains the look for a very long time
There are several other features which you are going to get from the chrome wheels. The company offers a high end product to their customers, which are going to meet all their needs. Chrome custom wheels are coated with chromium. This feature reflects the light and this is the coating that makes the rims shine. The wheel has multiple coatings and is available in different colors and finishes. You can choose the one that matches your styles. You just have to make sure that you are choosing the right size according to your vehicle.
These wheels are available in different weights so make sure that you are choosing the accurate weight. The weight of the wheel should be proportional. If this will mismatch, then this is greatly going to affect the performance of your car. The technicians of the company are going to assist you in choosing the right weight of the wheels for your car. You can even purchase the wheels from the website of the company. You can view the catalog of the company to get the best. There are different sizes, finishes available, from which you can choose the one that makes your car looks different and appealing. The company is also offering different packages to choose from. You can choose the one that suits you the best. Whatever your choice is you are going to find plenty of voices with the company.
After the 1900’s, the market for car wheels and rims has suddenly expanded. Today, most people want to modify their vehicle with the latest set of wheels. Wheels which are modified from the standard vehicle manufacturer wheels are called custom wheels. The overall look of the vehicle is changed as soon as you install a set of the trendiest custom wheels or rims. However, it is important that you choose the most appropriate wheels or rims for your vehicle.
Types of Custom Wheels and Rims
There are several kinds of wheels and rims available in the market. But you will have to make a choice keeping your vehicle in mind. You can get everything from spoke alloy wheels to the more superior chrome spinning wheels, which are the latest trend.
Appearance: In the case where you are just concerned about the appearance, then choose wheels and rims that suit your vehicle and add style to it. However if speed is your passion, then go for alloy wheels which are much lighter than chrome wheels. Alloy wheels will provide your vehicle with the desired performance. Alloys are best suited for city traffic, as they help to avoid overheating of the brake system.
To give sporty looks to your vehicle, install larger wheels and rims. You must choose the wheels that are matched with the bolt pattern of your vehicle. You should ask the salesperson to help you choose the right ones. This is essential because incorrectly installed custom wheels will create problems with the handling of your vehicle.
Pricing: With lower priced wheels, you will have to compromise on quality. If you want to purchase the most stylish and trendy custom wheels in a good quality for your vehicle, then it will cost you slightly more. Wheels and rims at online stores are slightly cheaper than at brick and mortar stores. However, the advantage of buying from a physical store is that you can see and check your wheels and rims before purchasing.
The most common way car enthusiasts modify their vehicles is to install a set of custom wheels. Automobile speed lovers, who are well aware of the performance benefits, opt for lighter, stronger or larger wheels. On the other hand, those who give preference to the looks of their vehicle opt for larger wheels, usually with a distinctive appearance.
There is no denying the fact that custom wheels and rims provide a unique and trendy look to your vehicle. However, it is also very important that the performance of your vehicle is not affected due to selecting the wrong set of wheels.
In the wheel industry monoblock and 3 piece are two of the most popular types of forged wheels. The terms “monoblock” and “3 piece” refer to the construction of the wheel, but the similarities end there. In fact, there are many differences between the two types that make each ideal for different kinds of automotive applications. Of all laser marking systems , the laser one is the most effective in terms of results and time and cost optimization. Plus, it’s environmentally-friendly.
Monoblock wheelsare also referred to as “one-piece” wheels, meaning that they are forged into a single part without any removable components. During the manufacturing process a monoblock wheel begins as a single, round block of 6061-T1 aluminum alloy. The aluminum block is compressed and subjected to intense heat which creates a dense grain structure and forms a round, blank piece of metal. The single piece of aluminum alloy is then flow-formed and placed in a CNC milling machine where the spokes are formed to finish the manufacturing process.
Being that monoblocks are made from a single piece of aluminum alloy, they are the lightest of forged wheels. Their low weight is sought after as they help to reduce unsprung mass which can reduce acceleration times, enhance braking, and improve handling. Monoblock wheels are often less expensive than their 2- or 3-piece forged counterparts, as fewer parts are used for construction. However, if a monoblock wheel is damaged or bent they are difficult to repair, often requiring a complete wheel replacement.
3 piece forged wheels offer different advantages over monoblocks, mostly from a styling standpoint. A 3 piece wheel has three main parts: a center, the outer hoop or “lip”, and the inner hoop. The manufacturing process of 3 piece wheels is similar to that of a monoblock, except more aluminum alloy blocks are used due to the increased number of parts. After all of the pieces are milled, they are fastened together using a number of perimeter bolts and sealed using Silicone RTV.
The construction of 3 piece forged wheels allows manufacturers the ability to offer a wider range of widths and fitments for customers. 3 piece wheels are also the most customizable as any of the components can be easily painted or chromed to create a unique color scheme. If they sustain any damage it can be readily replaced. In addition, 3 piece forged wheels retain the highest resale value amongst used wheels. 3 piece wheels are not without their disadvantages. They are the most expensive forged wheels because of their multi-piece manufacturing, and if the RTV Silicone seal is broken, leaks can form.